Application
Sarking Membrane | Roof Lining Membrane | Wall Lining Membrane
The pro clima SOLITEX membranes are extremely stable in form, making them quick, easy and accurate to lay. The overlap on the membranes should be at least 10 cm, a distance which is easy to stick to using the printed-on markings at 15 cm intervals.
A greater overlap is recommended if the roof pitch is less than the regulation amount. The membranes are attached using rust-resistant wide-headed pins or staples in the top third of the lining area.
SOLITEX UD - Roof Lining Membrane
Roof lining membranes are fitted to a fixed base, e.g. wooden planking. Due to their extremely high resistance to water (water column > 2500 mm), SOLITEX UD and PLUS are excellently suited to use as roof lining membranes.
The gluing of the roof lining membrane increases the water-proof properties of the roof area. It can be glued using either the double-sided adhesive tape pro clima DUPLEX or the acrylic adhesive ORCON F.
SOLITEX PLUS - Sarking Membrane
Sarking membranes are laid from one rafter to the next. Due to their extremely high resistance to water and to tearing out by nails , SOLITEX PLUS fulfills all the requirements of a sarking membrane.
SOLITEX WA - Wall Lining Membrane
The extremely high diffusion-permeability of the pro clima SOLITEX WA guarantees direct mounting onto the wall construction in all cases. This effectively prevents the formation from condensation. The pro clima SOLITEX WA membranes can be glued to one another using the double-sided pro clima DUPLEX adhesive tape or single-sided pro clima TESCON No.1 adhesive tape.