INTELLO PLUS®
pro clima INTELLO PLUS® is reinforced with robust PP fabric and may be used as a confining layer for all kinds of blown-in thermal insulating material. A transverse batten should be placed on the inside at a spacing of at most 50cm to take the weight of the insulating material. See pro clima system brochure for further details on insulation.
INTELLO PLUS® offers the same high potential for freedom from structural damage like INTELLO®.
bonding agents:
ORCON F
UNI TAPE
TESCON PROFIL
CONTEGA PV
| Technical Details | ||
|---|---|---|
| vapour diffusion resistance coefficient: | 37.500 | |
| water vapour transmission resistance: | sd | 0,25m to >20m |
| permeance | 13,20 to 0,17 US perms | |
| mvtr | 1,25MNs/g to 100MNs/g | |
| thickness: | 0,2mm | |
| surface weight: | 125g/m2 | |
| breaking load: | MD | 320N/5cm |
| XD | 280N/5cm | |
| fire rating: | B2 | |
| membrane: | polyethylene copolymer | |
| non-woven fabric: | polypropylene | |
| reinforcement: | polypropylene | |
| temperature resistance: | -40°C to +80°C | |
| colour: | white | |
| roll width: | 1,50m | |
| roll lenght: | 20m or 50m | |
| roll area: | 30m2 or 75m2 | |
| roll weight: | ||