EXTOSEAL MAGOV
Installation steps
1. Measure out the tape
Roll out the tape to the required length and cut to size.
1. Measure out the tape
Roll out the tape to the required length and cut to size.
2. Remove the first release film
Fold the tape in the middle and remove the first release paper.
2. Remove the first release film
Fold the tape in the middle and remove the first release paper.
3. Tape onto tube
Place the tape on the tube and tape it
around the tube gradually.
Ensure sufficient coating of the ends.
3. Tape onto tube
Place the tape on the tube and tape it
around the tube gradually.
Ensure sufficient coating of the ends.
4. Tape onto surface
Remove the second release paper completely.
Gradually fold the tape onto the surface
and piece by piece tape it all around.
4. Tape onto surface
Remove the second release paper completely.
Gradually fold the tape onto the surface
and piece by piece tape it all around.
5. Press on firmly
Afterwards, press bonding firmly all around.
Ensure that there is sufficient resistance pressure.
The pressing aid pro clima PRESSFIX is particularly efficient and protects your hands.
5. Press on firmly
Afterwards, press bonding firmly all around.
Ensure that there is sufficient resistance pressure.
The pressing aid pro clima PRESSFIX is particularly efficient and protects your hands.
6. Outdoor applications too
EXTOSEAL MAGOV also provides secure joining of penetrations outdoors, e.g. through wall lining and roof lining membranes.
6. Outdoor applications too
EXTOSEAL MAGOV also provides secure joining of penetrations outdoors, e.g. through wall lining and roof lining membranes.