CONTEGA SOLIDO EXO
Full-surface adhesive plaster sealing tape for exterior use that is open to diffusion
- Full-surface adhesive, the joint is immediately windproof and resistant to driving rain, and it can be subjected to loading
- Extremely strong adhesion on mineral subsurfaces too thanks to modified waterproof SOLID adhesive
- Can be plastered over
- Tape for joints on or under window frames
- Easy to apply
The CONTEGA SOLIDO EXO joint adhesive tape, which is full-surface adhesive and can be plastered over, ensures exterior windtight and diffusion-permeable sealing of windows and doors to adjacent building components made of wood and mineral materials such as concrete and sand-lime brick.
The modified waterproof SOLID adhesive ensures quick and permanent adhesion to the subsurface.
The stuck joint is immediately windproof and can be subjected to loading. The fleece can simply be plastered over in accordance with our application guide.
|Backing||PP backing fleece, PP copolymer special membrane|
|Adhesive||modified waterproof SOLID adhesive|
|Release film||one or two split silicone-coated PE sheet|
|sd-value||EN 1931||0.7 m||EN 1931|
|Vapor permeance||ASTM E 96||4.7 US perms||ASTM E 96|
|Exposure time||3 months|
|Water column||EN 20811||> 2 500 mm ; > 8' 2"||EN 20811|
|Resistance to driving rain||ift, MO-01/1:2007-01, Abs. 5||up to 600 Pa, surrounding||ift, MO-01/1:2007-01, Abs. 5|
|Requirement for bond strength, non-aged/aged||DIN 4108-11||passed||DIN 4108-11|
|Can be plastered over||yes|
|Application temperature||above -10 °C ; 14 °F|
|Temperature resistance||permanent -40 °C to 90 °C ; -40 °F to 194 °F|
|Storage||cool and dry|
The bonds should not be subjected to tensile strain.
Press firmly to secure the adhesive tapes in place. Ensure that there is sufficient resistance pressure.
Seals that are windproof and resistant to driving rain can only be achieved if the sealing tape is installed free of folds and breaks.
Before sticking, subsurfaces should be brushed off, wiped clean with a cloth or cleaned using compressed air.
Uneven mineral subsurfaces may need to be levelled with a smooth finish.
Bonding to frozen surfaces is not possible. The substrate material must be free of water-repellent substances (e.g. grease or silicone). Subsurfaces must be sufficiently dry and have sufficient load-bearing capacity.
Permanent adhesion is achieved on all pro clima interior membranes and on other vapour retarder and airtight membranes (e.g. those made of PE, PA, PP and aluminium). Adhesion can be carried out on planed and painted wood, hard plastics, hard wood-based panels (chipboard, OSB and plywood panels) and on mineral subsurfaces such as concrete and masonry.
The best results in terms of structural stability are achieved on high-quality subsurfaces.
It is your responsibility to check the suitability of the subsurface; adhesion tests are recommended in certain cases.
Pretreatment with TESCON PRIMER is recommended in the case of subsurfaces with insufficient load-bearing capacity.