INTELLO conneX
Installation steps
1. Joint between OSB wall and ground slab with INTELLO conneX
Apply two lines of adhesive.
1. Joint between OSB wall and ground slab with INTELLO conneX
Apply two lines of adhesive.
2. Install vapour check strips
Next, apply pro clima INTELLO conneX joint strips and press them into the adhesive bed. Do not press the adhesive completely flat so as to allow for relative motion between components.
2. Install vapour check strips
Next, apply pro clima INTELLO conneX joint strips and press them into the adhesive bed. Do not press the adhesive completely flat so as to allow for relative motion between components.