AEROFIXX technical support
Troubleshooting help to get you started!
Practical and easy-to-use: With the AEROFIXX application tool and AEROSANA VISCONN sealant from pro clima, you can quickly seal transitions between different building components in an airtight manner – both indoors and outdoors! Thanks to its double functionality, this convenient airtightness tool can spray sealant or else apply beads of sealant. As a result, locations that are difficult to access are no longer a problem!
The best results are obtained when the sealant material is inserted correctly, the technician is able to handle the device properly and the AEROFIXX application tool is in perfect working order. To ensure all of these requirements are achieved, we have produced a series of short videos (with English subtitles) on the most important aspects of handling, working with and cleaning the AEROFIXX spray gun.
In these short videos, you can find out everything you need to know about using AEROFIXX!
Quick start: AEROFIXX essentials
AEROFIXX quick start
How do I start up AEROFIXX? This video quickly takes you through all the steps required to make AEROFIXX ready to use. The short videos for each step are available in our overall playlist.
Changing the foil cartridge
Is your cartridge of sealant empty? This video shows you what to take into account when changing the tubular cartridge and how to start spraying again.
Use after an idle period
AEROFIXX may be left lying unused and uncleaned for a few weeks. The sealant material in the tubular cartridge will still be fresh. This video shows the steps that need to be taken when starting to use the device again after an idle period.
How AEROFIXX works
The most important factor in the mode of operation of AEROFIXX is its clever air pressure system. This video explains precisely how it works and how this affects the spray finish.
Step-by-step: Using AEROFIXX
These videos deal with preparatory steps and the proper operation of AEROFIXX
i. Pressure setting and compressor requirements
ii. Default setting of the pressure reducer on AEROFIXX
iii. Release and lubricating agents
iv. Inserting the tubular cartridge
v. Cutting the tubular cartridge
vi. Inserting the material nozzle and screwing on the spray head
vii. Continuous downward pressure on the spray head
viii. Screwing in the air nozzle
ix. Setting the spray head to spraying
x. Fine adjustment of the air-material ratio
Spray finishes and types of surface
xi. Spraying onto smooth surfaces with AEROSANA VISCONN
xii. Spraying onto porous surfaces with AEROSANA VISCONN
xiii. Spraying onto smooth surfaces with AEROSANA VISCONN FIBRE
xiv. Spraying onto porous surfaces with AEROSANA VISCONN FIBRE
xv. Correcting defects with a brush
xvi. Spraying over a gap
xvii. Embedding fleece
Line/bead application
xviii. Line application with AEROSANA VISCONN FIBRE
xix. Applying a bead of Orcon F (without an air nozzle)
Quality assurance
xx. Checking the application thickness
Storage and cleaning
These videos provide useful tips relating to storage, cleaning and more.
xxi. Storing and transporting AEROFIXX
xxii. Storing the tubular cartridges
xxiii. Cleaning the material and air nozzles
xxiv. Troubleshooting: cleaning the spray head
