Full-surface adhesive plaster/window-sealing tape with an additional adhesive zone, for exterior use

CONTEGA SOLIDO EXO-D

Advantages

  • Saves time: the joint is immediately resistant to driving rain and can be subjected to loading
  • Easy to work with thanks to the additional adhesive zone on the fleece side
  • Can be plastered over directly: defined transition between window and/or wind sealing and plasterwork
  • Reliable joints: water-resistant SOLID adhesive has extremely strong adhesion on mineral subsurfaces too
  • Independently confirmed suitability: tests in accordance with MO-01/1 passed at IFT in Rosenheim, Germany

Areas of application

For exterior windtight joints that are resistant to driving rain between membranes or wood-based panels and windows, doors and mineral surfaces. The adhesive zone on the fleece side allows for easier adhesion to windows and doors if applied before they are installed. The taped joint is immediately windproof and can be subjected to loading. The fleece can simply be plastered over in accordance with the installation instructions.

Splits on release film

Tape width Split (approx.)
80 mm (3 1/8") 20 | 60 mm (3/4" | 2 3/8")
100 mm (4") 20 | 40 | 40 mm (3/4" | 1 5/8" | 1 5/8")

Technical specs

  Material
Backing PP backing fleece, PP copolymer special membrane
Adhesive Modified water-resistant SOLID adhesive
Release film Single/double-split silicone-coated PE sheet
Property Value Regulation
Colour Black
sd value 0.7 m EN 1931
g value 3.5 MN⋅s/g
Vapour permeance 4.7 US perms ASTM E 96
Outdoor exposure 3 months
Resistance to driving rain Up to 600 Pa, around window ift, MO-01/1:2007-01, Abs. 5
Water column > 2 500 mm ; > 8' 2" EN ISO 811
Bond durability, non-aged/aged Passed DIN 4108-11
Can be plastered over Yes
Installation temperature Above -10 °C ; 14 °F
Temperature resistance Permanent -40 °C to 90 °C ; -40 °F to 194 °F
Storage Cool and dry


Brochure and installation guide for pro clima window-sealing products