DASAPLANO 0,01 connect
Airtightness membrane for roof refurbishment from the outside, with self-adhesive strips
Advantages
- Simple implementation of the airtightness layer: installation across rafters and insulation
- Dry and reliably protected building components thanks to active moisture transport
- Protection during the construction phase: suitable as a temporary covering
- Quick and reliable adhesion thanks to the integrated ‘connect’ self-adhesive strips along the membrane strips
- Excellent values in hazardous substance testing, has been tested according to the ISO 16000 evaluation scheme
Areas of application
For use as an airtightness membrane that can be subjected to outdoor exposure for roof refurbishment from the outside in the case of full packing of the existing spaces between the rafters with insulation. Installation across the rafters, underneath an additional layer of over-rafter insulation consisting of wood-fibre underlay panels. Please contact Technical Support at pro clima in Germany for assistance with calculating the thickness of the external wood-fibre insulation that is required from a building physics viewpoint.
Installation instructions
Installation steps
General conditions
DASAPLANO 0,01 connect is to be installed with the printed side facing the installation technician. The membrane is to be installed horizontally (parallel to the eave) in a taut manner, covering over the compartment insulation.
If DASAPLANO 0,01 connect is subject to outdoor exposure or rain, the membranes must be installed perpendicular to the water run-off direction. This will ensure better protection of the building structure against moisture penetration.
To avoid condensation formation, the thermal insulation cover should be installed immediately after airtight adhesion of DASAPLANO 0,01 connect. This applies particularly to work carried out in winter.
Airtight seals can only be achieved on vapour check (alternate terms: vapour control or retarder) membranes that have been fitted with no folds or creases.
A normal indoor residential climate is present for the entire duration of the refurbishment work.
Note: Please contact Technical Support at pro clima in Germany for assistance with calculating the thickness of the external wood-fibre insulation that is required from a building physics viewpoint.
