New products 2023
SOLITEX ADHERO VISTO
Transparent weathering-protection membrane
This membrane with full-surface adhesion provides transparent temporary protection for intermediate floors on multi-storey CLT or wooden-frame buildings during the construction period.
- All markings and guidelines on timber floors remain visible
- Full-surface water-resistant adhesive
- Can be subjected to outdoor exposure
- Anti-slip surface
- Complete weather-protection concept for the construction phase
NEW:
The following supply forms have been added for these existing products:
Product | Art. no. | Length | Width | Split on the release film |
---|---|---|---|---|
INTELLO X | 1AR03858 | 50 m | 3.0 m | - |
SOLITEX ADHERO 1000 | 1AR04031 | 30 m | 1.0 m | 0.25 / 0.75 m |
1AR04033 | 30 m | 0.5 m | - | |
SOLITEX ADHERO 3000 | 1AR04027 | 30 m | 1.0 m | 0.25 / 0.75 m |
1AR04029 | 30 m | 0.5 m | - |
New products 2022
INTELLO X • One membrane, but many applications!
Humidity-variable, UV-resistant and can be subjected to outdoor exposure
When installed to serve as an airtight membrane underneath over-rafter insulation, INTELLO X provides protection for the underlying structure against the elements during the construction phase. If installed inside a roof underneath between-rafter insulation, this membrane offers excellent resistance to diffuse UV light. The versatility of INTELLO X is underlined by the fact that can be installed on structures that are diffusion-open to the outside or diffusion-tight.
New products 2021
SOLITEX WELDANO 3000
Diffusion-open, weldable roofing underlay membrane
For use as a 3-ply permeable, homogeneously weldable underlay membrane for demanding sub-roof applications as per the Swiss SIA 232/1 standard. Serves as a rainproof/watertight roof lining in Germany – on an individual contractual basis. Suitable for installation on pressure-resistant subsurfaces, e.g. wooden decking, wood-based panels and wood-fibre underlay panels.
New products 2020
AEROFIXX • Spraying instead of sticking
Application tool for foil cartridges as part of the AEROSANA system
For particularly quick and easy application of the AEROSANA VISCONN and AEROSANA VISCONN FIBRE sealants from sausage-shaped foil cartridges onto smooth and rough mineral and non-mineral substrates such as timber, wood fibreboards, OSB, stone, plaster, concrete etc. Suitable for compressors with a suction flow rate of at least 300 l/min.
SOLITEX FRONTA QUATTRO FB
Flame-resistant breather membrane (WRB) for open-jointed cladding with a gap width of up to 35 mm
For use as a breather membrane (weather-resistive barrier, WRB) behind closed and open facades (open-jointed cladding, gap width up to 35 mm; cladding width = at least 3 x gap width). For installation onto boarding, wood-based panels and all panel-shaped thermal insulation materials.
New products 2019
AEROSANA VISCONN system
Sprayable airtightness sealant with a humidity-variable sd value
For use as a humidity-variable vapour retarder and airtight layer that can be applied as a spray or using a brush on wall, ceiling and floor surfaces, such as non-plastered masonry or porous panel-form materials.
SOLITEX ADHERO
Full-surface adhesive, diffusion-open airtightness and weathering-protection membrane
Steep roofs and walls
Allows airtightness to be achieved on wood-based products and mineral subsurfaces – e.g. on the exterior side of unplastered (fair-faced) masonry or concrete components with joints. For roofs, it also fulfils the requirements of the Central Association of the German Roofing Trade (ZVDH) for an underlay and for temporary coverings for the specified time period.
Temporary protection for floors during construction
Thanks to its full-surface adhesion, this membrane provides temporary protection for intermediate floors/ceilings on multi-storey CLT (cross-laminated timber) or wooden-frame buildings during the construction period.
CONTEGA SOLIDO IQ • CONTEGA SOLIDO IQ-D
Intelligent, full-surface adhesive window/plaster sealing tapes for interior and exterior use
For interior use for vapour-checking and airtight connections between membranes or wood-based panels and windows, doors or mineral surfaces. For exterior use to achieve windtight joints that are resistant to driving rain.
SOLTEMPA
Full-surface adhesive sealing strip
Eave membrane for installation onto SOLITEX WELDANO for open eave ends with a perforated plate. Allows for drainage of the sub-roof into the gutters.