AEROFIXX
Application gun for AEROSANA system foil cartridges
Advantages
- Work more quickly: application and spreading of liquid sealant in a single working step
- Precise application of sealant: setting 1 for a line of sealant to fill joints, setting 2 to spray over and seal surfaces
- Allows the technician to work with one hand
- No brush required
- Pressure: up to 6.8 bar (100 psi)
Areas of application
For particularly quick and easy application of the AEROSANA VISCONN and AEROSANA VISCONN FIBRE sealants from 600 ml (20.3 US fl oz) foil cartridges onto smooth and rough mineral and non-mineral subsurfaces such as timber, wood fibreboards, OSB, stone, plaster, concrete etc.
For use with air compressors capable of up to 6.8 bar (100 psi), 300 l/min air flow.
Installation instructions
AEROFIXX application method
Video: Working with the AEROFIXX
Eave refurbishment with AEROFIXX
Video: Sealing transitions at eaves with AEROFIXX on refurbishment projects
Joints at double collar ties with AEROFIXX
Video: Sealing transitions at double collar ties with AEROFIXX
Window joint with AEROFIXX
Video: Sealing transitions around windows and doors with AEROFIXX
General conditions
The AEROFIXX device is connected to a compressor with a suction flow rate of >300 l/min. The pressure should be set to 6 bar. (87 psi). All AEROSANA VISCONN products in 600 ml (20.3 US fl oz) foil cartridges can be applied using the AEROFIXX device. You can easily switch between line application and spray application by turning the spray head.
AEROFIXX technical support videos
Here you will find tips, support and troubleshooting information on how to work with AEROFIXX.
