Weld­ing li­quid in the SOLI­TEX WELDANO roof lin­ing sys­tem



  • Eco­nom­ic­al to ap­ply
  • Re­li­able ho­mo­gen­eous bonds can quickly be sub­jec­ted to load­ing
  • Cus­tom­ised weld­ing li­quid in the SOLI­TEX WELDANO roof lin­ing sys­tem


Weld­ing li­quid agent for wa­ter­proof ad­he­sion of over­laps for roof lin­ing mem­branes made of PU (e.g. SOLI­TEX WELDANO).
Also suit­able for ad­he­sion of ac­cessor­ies - such as SOLI­TEX WELDANO-S seal­ing strips - that are used to seal de­tails.

Material Tetrahydrofuran (90 %), Cyclohexanone (10 %)
Attribute Value Norm
Colour transparent
Application temperature > 0 °C, optimally 18-20 °C ; 32 °F, optimally 64-68 °F
Storage 15 °C to 25 °C ; 60 °F to 77 °F, dry and well ventilated, only in the original container, keep away from heat and sources of ignition

Be­fore WELDANO TURGA is ap­plied, SOLI­TEX WELDANO should be wiped clean with a cloth.
There must be no wa­ter-re­pel­lent sub­stances (e.g. grease or sil­ic­one) on the sub­sur­face.

Shake the container or stir the contents before use. Around 200 - 250 metres (219-270 yd) of membrane length can be welded (weld joint width 30 mm; 1.2") using a litre of WELDANO TURGA. The working temperature must not be below 0 °C / 32 °F.

Use the 500 ml bottle with a brush for particularly quick and easy application.
Advantages: quick and easy application of the WELDANO TURGA solvent welding agent, allows the technician to work with one hand, no contamination of the solvent welding agent in the container, volume of 500 ml (16.9 US oz).